Homelite UT74121D User Manual

OPERATOR’S MANUAL356 mm (14 in.) 33cc ChainsawCSP3314Model No. UT74121DYour new chainsaw has been engineered and manufactured to Homelite’s high stand

UK - Page 10OPERATIONNOTE: Do not use dirty, used or otherwise contaminated oils.Damage may occur to the oil pump, bar, or chain.1. Carefully pour the

UK - Page 11OPERATION Maintain a proper grip on the saw whenever the engine isrunning. The fingers should encircle the handle and thethumb be wra

UK - Page 12OPERATIONADJUSTING IDLING SPEEDSee Figure 24. If the engine starts, runs, and accelerates but will not idle,turn the idling speed scr

UK - Page 13OPERATIONOn large diameter trees, stop the back cut before it is deepenough for the tree to either fall or settle back on the stump.Then i

UK - Page 14OPERATIONCUTTING SPRING POLESSee Figure 37.A spring pole (A) is any log, branch, rooted stump, or saplingwhich is bent under tension by ot

UK - Page 15MAINTENANCENOTE: New chain tends to stretch. Check the chain tensionfrequently and tension as required.CAUTION:A chain tensioned while war

UK - Page 16MAINTENANCEMAINTAINING DEPTH GAUGE CLEARANCESee Figures 51, 59, and 60. Maintain the depth gauge (A) at a clearance of 0.6 mm(0.025 in.).

UK - Page 17MAINTENANCEChoose one of the following cleaning options:9. To lightly clean, tap the filter against a smooth, flat surfaceto dislodge most

UK - Page 18RECOMMENDED BAR AND CHAIN COMBINATIONS FOR .375 LOW PROFILE .050 GAUGELength of Bar Guide Bar Part Number Chain Part Number356 mm (14 in.)

UK - Page 19PROBLEM POSSIBLE CAUSE SOLUTIONEngine starts, runs,and accelerates butwill not idle.Engine starts and runs,but chain is not rotating.Bar

UK - Page 2TABLE OF CONTENTS Introduction ...

UK - Page 20EC DECLARATION OF CONFORMITYAccording to machinery directive 98/37/EC and EMC directive 89/336/EEC - We,Homelite Consumer Products Inc., 1

UK - Page 3GENERAL SAFETY RULESWARNING:The warnings, labels, and instructions found in thissection of the operator’s manual are for your safety.Failur

UK - Page 4 KEEP ALL PARTS OF YOUR BODY away from the sawchain when the engine is running. ALWAYS CARRY THE CHAINSAW WITH THE ENGINESTOPPED A

UK - Page 5SPECIFIC SAFETY RULESPROPER CLOTHING FOR SAFETY Wear close-fitting clothing. Always wear heavy, longtrousers, boots, and gloves. Do no

UK - Page 6I0SYMBOLSRUNOSTOPImportant: Some of the following symbols may be used on your tool. Please study them and learn their meaning.Proper inte

UK - Page 7SYMBOLSPetrol Use unleaded petrol intended for motor vehicle usewith an octane rating of 87 ([R + M] / 2) or higher.Oil Use 2-cycle oil for

UK - Page 8FEATURESOPERATIONSee Figure 1.(A) Front hand guard/Chain Brake(B) Front handle(C) Cylinder cover(D) Primer bulb(E) Choke Lever(F) Chain(G)

UK - Page 9OPERATIONKICK-BACK PRECAUTIONSSee Figures 4 and 5.Rotational kick-back (A) occurs when the moving chain contactsan object at the Kick-back