Page 13
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always wear safety goggles or safety glasses with side
shields during product operation. If operation is dusty,
also wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal
injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an Authorized Service Center.
WARNING:
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not place
your hand or fingers between blades or in any position
where they could get pinched or cut. NEVER touch blades
or service unit while running.
LUBRICATING THE BLADE
See Figure 9.
For easier operation and longer blade life, lubricate grass
shear/shrubber blades before and after each use. If you will
be using the grass shear/shrubber for an extended period,
it is advisable to oil the blade during use.
Stop the motor.
Install padlock (not included) into switch trigger slot. Keep
both hands away from switch.
Lay the grass shear/shrubber on a flat surface. Apply light
weight machine oil along the edge of the top blade.
Remove padlock from switch trigger slot.
NOTE: Do not oil while the grass shear/shrubber is
running.
CLEANING THE GRASS SHEAR/SHRUBBER
Stop the motor.
Install padlock (not included) into switch trigger slot. Keep
both hands away from switch.
Slide the scabbard over the blade.
Clean dirt and debris from the body of the grass shear/
shrubber, using a damp cloth with a mild detergent.
Remove padlock from switch trigger slot.
NOTE: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
Fig. 9
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals